air neck traction

Product name Air neck tractioSpecification:The scope of application: It is suitable for cervical vertebra spondylosis,Structure and composition Air neck tractions are mainly made by inflatable balls (with valves), gas-guide tube, gas cut-off valves, chamber, bushings, inflatable mouth, neck care and velcro. According to the different gas chamber, air neck traction can be divided into three layer, four layer, five layer, seven layer. Put it around your neck and adjust to the inner diameter to as appropriate. Rotate the exhaust valve on the inflatable balls clock wise and release the gas cut-off valves Hold the inflating ball and inflate till you feel comfortable by pushing the gas cut-off valves tight. Traction time depends on the conditions necessary for the treatment. Follow the doctor’s advic After traction, release gas cut-off valves and gas-nut. Deflate gases slowly. Relax the neck as far as possible during the treatment. Inflate slowly to enhance traction effect. Inflating should be gradual and not excessive. If appear dizzy or other abnormal reaction, please deflate slowly until the adverse symptoms disappeared. Then re-adjust and use. Forced tearing is not available in case of bonding leaking. If the surface of traction is dirty, please use soft brush to clean. But do not use water for a forced clean. Minors should not be used on its own. Please read the manual carefully before use or follow the doctor’s advice. VIII Contraindications Patients with heart or cerebrovascular disease should not use this product.Patients suffering with cancer, bleeding of sexual orientation or skin lesions should not use this product. VIIII Storage method The product should be stored in a cool, clean and dry place.